There are several culprits for this ranging from a dull needle, improper threading or tension. The tension in both your upper and bobbin threads need to be even. The bobbin could also be placed incorrectly. More than likely, you forgot to put the bobbin back correctly while cleaning your machine.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
How do I fix bobbin thread bunching?
How to Fix Bobbin Thread Bunching and Other Threading Problems
- Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle. …
- Change the Needle. …
- Inspect the Bobbin. …
- Clean the Machine.
Why is my bottom stitch loose?
Another reason you may experience loose stitches is that the thread tension may be low and may not be tight enough to hold these threads tighter to the fabric. When you experience loose thread, you should readjust your tension to see if it is close enough to stop the loose stitches.
What should my tension be on my sewing machine?
As the bobbin thread tension is factory-set and wouldn’t usually be adjusted for normal sewing. So we’ll be talking only about the top thread tension since that’s where you’d usually make the adjustments. The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing.
Why does my thread keep jamming?
The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.
How do you fix loose threads?
First, thread your hand sewing needle, no need to knot the end. Next, insert your threaded needle inside the loop of the snag and pull through until the end of the thread is close to the loop. Create a knot around the loop with the end of your thread. Using your scissors, snip the excess thread from the knot.
Why does my sewing machine have loose stitches?
The machine is not correctly threaded
If the machine is threaded wrong, not only does it make the thread breaks easier, but is also more likely to create loose stitches. Check the threading to see if the thread has passed through the entire thread guides, the take-up lever and the eye of the needle.
What tension should Jeans be set at?
Tension is ideal up to 6, but is too high after that and pulls the top stitch into a flat line. Regular thread, bobbin thread view. The bobbin stitches clear up around 6 but don’t improve much after that.