If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension.
What causes a sewing machine not to stitch?
Machine is skipping stitches
First, check that your needle is installed correctly, not bent or otherwise damaged, and that you’re using the right type of needle for your project. If the top thread is not reaching the bobbin, the threads will not lock properly, resulting in a skipped stitch.
Why won’t My Brother sewing machine pick up the bobbin thread?
There could be several things that could cause the machine not to pick up the bobbin thread. The upper thread could be tangled. Remove the thread completely from the machine. The correct size spool cap should be used for the size of the thread spool.
Why is my bobbin thread knotting up?
Bobbin Thread Tangling
The bobbin keeps pulling and jamming collecting a lot of thread beneath your fabric. There are several culprits for this ranging from a dull needle, improper threading or tension. The tension in both your upper and bobbin threads need to be even. The bobbin could also be placed incorrectly.
Does bobbin thread go through needle?
Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.
Why is my bobbin not working?
This usually happens if there is grease and dust build up in the bobbin compartment. It can also occur if the bobbin thread is not attached correctly, the thread has formed a knot or a problem with the bobbin case. Open the bobbin compartment, remove the entire bobbin case and clean up the area around the bobbin.
Why won’t my sewing machine wind the bobbin?
If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.
How do you adjust the tension on a bobbin?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.