Your question: How can I make my curtains shorter without cutting them?

When curtains appear too long, try sewing a hem, which can allow you to shorten curtains without cutting curtains to length so you can retain the fabric if you want to. Another way of shortening curtains is to incorporate a folded design with buttons as fasteners. Folding the curtain hem up creates a double hem.

What do you do when your curtains are too long?

  1. Move the Rod. The easiest way to shorten curtains without hemming is to move the curtain rod. …
  2. Tie Them Back. Install a tieback and blouse the excess curtain over the tie creating a swagged effect. …
  3. Fuse or Glue. …
  4. Pinch & Pickup. …
  5. Fake a Valance.

How do you shorten the bottom of lined curtains?

To do this, start with your tape measure just touching the very bottom of your new face fabric hem, and measure down 1.5 inches (3.5 cm). Add a marker pin and repeat the process across the width of your curtain. Now grab those trusty scissors and cut along your marker pins, removing them as you go.

IT IS INTERESTING:  Does Braidless sew in damage hair?

Is it hard to sew curtains?

Curtains may look really tricky but they are easy to sew!

Curtains are only as complicated as you want them to be. Just start simple, ideally with a plain fabric, and progress as your confidence improves.

Is it OK to have curtains too long?

It really doesn’t matter if curtains are too long as you can choose their length according to your liking and/or interior design style. You also have the option to shorten the curtains either by sewing, hemming, using tiebacks, or raising the rod, if you find the curtains too long for your home décor.

Do short curtains look bad?

The reason that the short curtains here look so bad is because of the fabric color. The cobalt blue is much darker than any other color in the bedroom and you get drawn to it, so it exaggerates the fact that the curtains just stop at the window sill, and they only have a few centimeters to get to the floor.

Should my curtains touch the floor?

The fabric should just touch the floor or hover half an inch above. This is also a great approach for café curtains (short panels that cover only the lower portion of a window and hit the sill), which work well in spots like the kitchen and bathroom, where long drapes aren’t practical.

Can I hem curtains by hand?

A hand-sewn hem is the hallmark of a custom-made curtain panel. It is also the solution to ready-made panels that are too long in a household where there is no sewing machine. A well-sewn hem adds weight to the bottom edge of the curtain and helps keep it hanging straight.

IT IS INTERESTING:  Your question: Can I use polyester thread in a sewing machine?

Can you cut curtains with scissors?

Cut Your Curtains

Once you have measured your new hem and pinned it out, cut off the excess curtain using fabric scissors by following the pinned line.

How many inches should a curtain hem be?

Standard floor-length curtains should have a three to four-inch hem, plus another three to four inches for the double fold. Your curtains should then be six to eight inches longer than where you place your pins.

Do dunelm shorten ready made curtains?

Dunelm do lovely curtains, & material. They did charge me £25 to shorten a 90″ drop of ready made curtains that were £100. … Often the fabric choices are much better too than the ready-mades.

How long should curtains be?

Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. “Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don’t look right in most scenarios and end up being an awkward length,” says Curtis.

Can you hem blackout curtains?

Once your fabric and liner are cut, the first thing to do is iron your top hem. Fold over your fabric one inch, iron. Fold over one inch again, iron. With your hem ironed, tuck the blackout liner under the hem leaving equal amounts of fabric on the sides and pin all across the top.

Handmade