If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension.
How do I reset the bobbin tension?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
Why is My Brother sewing machine not picking up bobbin thread?
– Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. … – Make sure that the upper thread is threaded properly. – Re-thread your machine, if necessary.
Can I sew without a bobbin?
You can’t sew without a bobbin, as the machine requires two spools in order to operate properly. Therefore, you will need to add the bobbin thread in addition to your needle thread.
Why does my sewing machine keep jamming?
1 5 Reasons Why Your Sewing Machine Keeps Jamming: 1.1 Lack of tension on the upper thread. 1.2 Your machine is clogged at some point or place. 1.3 The needle is deformed or broken.
What number should the tension be on a sewing machine?
As the bobbin thread tension is factory-set and wouldn’t usually be adjusted for normal sewing. So we’ll be talking only about the top thread tension since that’s where you’d usually make the adjustments. The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing.
When should I adjust the tension on my sewing machine?
When lower tension is too loose (or upper tension is too tight), knot is visible on right side (left). When upper tension is too loose (or lower tension is too tight), knot is visible on wrong side (right). Tensions can still need adjustment even if they’re balanced.
What is wrong with my bobbin thread?
There are several culprits for this ranging from a dull needle, improper threading or tension. The tension in both your upper and bobbin threads need to be even. The bobbin could also be placed incorrectly. More than likely, you forgot to put the bobbin back correctly while cleaning your machine.
Why is my bobbin not working?
This usually happens if there is grease and dust build up in the bobbin compartment. It can also occur if the bobbin thread is not attached correctly, the thread has formed a knot or a problem with the bobbin case. Open the bobbin compartment, remove the entire bobbin case and clean up the area around the bobbin.