If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension.
Why is My Brother sewing machine not picking up bobbin thread?
There could be several things that could cause the machine not to pick up the bobbin thread. The upper thread could be tangled. Remove the thread completely from the machine. The correct size spool cap should be used for the size of the thread spool.
What is wrong with my bobbin thread?
There are several culprits for this ranging from a dull needle, improper threading or tension. The tension in both your upper and bobbin threads need to be even. The bobbin could also be placed incorrectly. More than likely, you forgot to put the bobbin back correctly while cleaning your machine.
Does bobbin thread go through needle?
Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.
Can I sew without a bobbin?
You can’t sew without a bobbin, as the machine requires two spools in order to operate properly. Therefore, you will need to add the bobbin thread in addition to your needle thread.
Why won’t my sewing machine needle go up and down?
A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. Engage the hand wheel clutch if you have it disengaged for bobbin winding. If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt.
How do you adjust the tension on a bobbin?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
Why is my sewing machine Birdnesting?
The main source of birdnesting or looping is improperly inserted or threaded bobbin or running the embroidery machine with no bobbin. … A tight bobbin tension, together with highly loose needle thread tension, can cause birdnesting. Flagging occurs when the hoop bounces up and down during sewing.
Why is my sewing machine jamming underneath?
However certain you are that the problem with the machine is most likely due to a huge tangled mess of thread in the bobbin underneath the fabric, the most common reason for the jamming is usually the lack of sufficient tension in the upper thread.