A dull sewing needle may not puncture your fabric correctly, causing problems while you sew. If your needle cannot pick up the bottom thread while the bobbin continues to give more thread, the thread can get tangled in the bobbin area.
Why does my sewing machine keep jamming underneath?
However certain you are that the problem with the machine is most likely due to a huge tangled mess of thread in the bobbin underneath the fabric, the most common reason for the jamming is usually the lack of sufficient tension in the upper thread.
How do I fix bobbin thread bunching?
How to Fix Bobbin Thread Bunching and Other Threading Problems
- Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle. …
- Change the Needle. …
- Inspect the Bobbin. …
- Clean the Machine.
How do you fix sewing machine that keeps jamming?
This may require gently tugging at the fabric and lifting it enough that you can snip at the threads and pull the fabric free of the machine. Next, remove all the jammed thread; this may require removing the bobbin, the throat plate, and any other parts to release any jammed threads and get the machine sewing again.
Why is my thread Birdnesting?
The main source of birdnesting or looping is improperly inserted or threaded bobbin or running the embroidery machine with no bobbin. … A tight bobbin tension, together with highly loose needle thread tension, can cause birdnesting. Flagging occurs when the hoop bounces up and down during sewing.
What tension should my sewing machine be on?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
Why does my thread keep bunching?
What should I do if I experience thread bunching? As “thread bunching” occurs on the underside of the fabric, some people think it is due to the lower thread. They check whether the bobbin is sitting correctly in the bobbin case or even replace the bobbin. … On many models, the upper thread tension is set automatically.