What part of the sewing machine holds the bottom thread?

holds the bottom thread bobbin
holds spool of thread spool pin
holds the fabric against the feed dogs as you stitch presser foot
regulates the tension of the tension discs on the needle thread tension control

What holds the bottom thread on a sewing machine?

Bobbin- holds the thread inside the machine. Bobbin case – holds the bobbin and provides bobbin thread tension.

What holds the bobbin in place?


Question Answer
Holds the bottom thread in the machine Bobbin
Holds the bobbin in place Bobbin Case
Seam guidelines are located here. Covers the bobbin case area. Stitch Plate
Teeth that feeds fabric through machine Feed dogs

What holds the bobbin and regulates bottom tension?

What holds the bobbin and regulates bottom tension? What are the teeth that move the fabric through the machine called? What can be turned to raise and lower the needle?
What is the bias? What is the selvage? Which natural fiber is comfortable, easy to care for and very popular but tends to wrinkle?
IT IS INTERESTING:  How did the sewing machine affect society?

What holds the bobbin when the thread is wound from the spool to the bobbin?

Fashion Design

Term Definition
Bobbin winder spindle Holds the bobbin while thread is wound from the thread spool to the bobbin
Bobbin winder thread guide Guides thread from spool pin to bobbin winder spindle
Feed Dogs A set of metal “teeth” that move the fabric during stitching
Foot Control Controls the speed of your stitching

What kind of machine that makes you an easier and faster?

Answer. -In addition to sewing faster, the serger makes a stronger seam than conventional sewing machines. Its system of needles and loopers forms a network of interlocking stitches that extend over the edge of the seam, which is why the serger is sometimes called an overlock machine.

Which part of sewing machine that holds and tightens the needle?

Needle Clamp holds and tightens the needle. 16. Parts of the Sewing Machine in the Arm • 8. Presser Foot holds the fabric in place while sewing.

Which controls how fast the machine sews?

Foot Pedal.

Controls the speed at which your sewing machine makes stitches. Press down harder on the pedal to make the machine stitch faster. Ease up on the pedal for slower stitching. The needle is what puts the thread through the fabric.

What turns the sewing machine on and off?

Needle position control knob-moves the needle to different positions: center, right, and left. Leave at 1 for straight stitch. 2-5 is for width of the zig zag. Power switch- turns the sewing machine on or off.

IT IS INTERESTING:  Quick Answer: Is there a sewing machine made in the USA?

What controls the sewing machine?

Hand wheel controls the movement of the take up lever and needle; can be controlled by power or by hand; should ALWAYS be turned toward you.

What lowers and raises the feed dog?

Use the feed dog position switch to raise or lower the feed dogs. : The feed dogs are up and will help guide the fabric. : The feed dogs are down and will not help guide the fabric.

What surrounds and protects the feed dog?

Throat Plate. Surrounds the feed dog and keeps the material from slipping after the feed dog has been adjusted to the proper height.

What controls the tension disc?

The tension discs squeeze the thread as it passes between them, while the tension regulator controls the amount of pressure on the discs. On older machines, there are only two tension discs, controlled by a screw or knob.

What holds the fabric against the feed as you stitch?


moves the fabric under the presser foot, adevancing the fabric one stitch at a time feed dogs (of feeds)
holds the bottom thread bobbin
holds spool of thread spool pin
holds the fabric against the feed dogs as you stitch presser foot

What is the thing that thread is wrapped around?

This fault is termed birdnesting, that is, the thread gets wrapped up like a bird’s nest. This is usually caused by using different thread weights in the top thread and bobbin. When you use thread weights that are not equal, the machine tends to pull them at different rates, which in turn results in bunching.

IT IS INTERESTING:  What are sewing needles made of?