|Holds the bottom thread in the machine||Bobbin|
|Holds the bobbin in place||Bobbin Case|
|Seam guidelines are located here. Covers the bobbin case area.||Stitch Plate|
|Teeth that feeds fabric through machine||Feed dogs|
What holds the bobbin?
Bobbin spindle- holds the bobbin while it winds. Bobbin winder tension- provides tension on the thread when the bobbin winds.
What do you call this part of the sewing machine that holds the bobbin?
The bobbin housing holds your bobbins inside your sewing machine. Bobbin Winder Tension Disc. This small metal disc helps to keep the thread taut as you wind a bobbin.
What holds the bobbin and regulates bottom tension?
|What holds the bobbin and regulates bottom tension?||What are the teeth that move the fabric through the machine called?||What can be turned to raise and lower the needle?|
|What is the bias?||What is the selvage?||Which natural fiber is comfortable, easy to care for and very popular but tends to wrinkle?|
What holds the spool of thread in place?
3.01 SEWING MACHINE PARTS
|holds the bottom thread||bobbin|
|holds spool of thread||spool pin|
|holds the fabric against the feed dogs as you stitch||presser foot|
|regulates the tension of the tension discs on the needle thread||tension control|
What kind of machine that makes you an easier and faster?
Answer. -In addition to sewing faster, the serger makes a stronger seam than conventional sewing machines. Its system of needles and loopers forms a network of interlocking stitches that extend over the edge of the seam, which is why the serger is sometimes called an overlock machine.
Is the complete sewing machine without a cabinet or stand?
1. Head is the complete sewing machine without a cabinet or stand. 2. Arm is the curve part of the head containing mechanism for operating the needle.
What controls the sewing machine?
Hand wheel controls the movement of the take up lever and needle; can be controlled by power or by hand; should ALWAYS be turned toward you.
What are the 3 major parts of sewing machine?
PARTS OF A SEWING MACHINE
- PARTS OF A SEWING MACHINE.
- Spool pin: Holds a spool of thread.
- Bobbin winder spindle: Bobbin is placed here during winding.
- Bobbin winder stopper: Stops winding the bobbin when it reaches capacity.
- Stitch width dial: Controls the width your stitch.
What turns the sewing machine on and off?
Needle position control knob-moves the needle to different positions: center, right, and left. Leave at 1 for straight stitch. 2-5 is for width of the zig zag. Power switch- turns the sewing machine on or off.
What raises and lowers the presser foot?
|Lifts and lowers the presser foot||Presser Foot Lifter|
|Carries the thread and pierces the fabric||Needle|
|Holds the needle in place||Needle Clamp|
|Reverse sewing in order to secure stitches at end of seam||Reverse Button|
What controls the tension disc?
The tension discs squeeze the thread as it passes between them, while the tension regulator controls the amount of pressure on the discs. On older machines, there are only two tension discs, controlled by a screw or knob.
Which part of sewing machine that holds and tightens the needle?
Needle Clamp holds and tightens the needle. 16. Parts of the Sewing Machine in the Arm • 8. Presser Foot holds the fabric in place while sewing.
What is the flat spool that holds the bottom thread?
|Term Handwheel||Definition Controls the up and down movement of the needle and thread take-up lever by hand.|
|Term Bobbin||Definition A small, flat spool that holds the bottom thread.|
|Term Bobbin case||Definition Holds the bobbin and is located beneath the throat plate.|
What is that lower part of the machine that removes the belt from the wheel?
Belt shifter: This is the part that removes the belt away from the wheel.
What part of sewing machine holds the fabric in place?
A presser foot is an attachment used with sewing machines to hold fabric flat as it is fed through the machine and stitched.