The C4 error message is when the thread is tangled with the bobbin case. Remove the bobbin and clean out the area. If that doesn’t fix it, then you probably need to remove the bobbin case itself. The entanglement might be below the case where it can’t be seen.
What does C3 mean on a Singer sewing machine?
The C3 error as well as the beeping when you turn on your machine indicates the foot control plug is not fully pushed into the sewing machine. Turn off your sewing machine and push the foot contol plug into the machine fully.
What should the tension be set at on a Singer sewing machine?
So we’ll be talking only about the top thread tension since that’s where you’d usually make the adjustments. The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics.
What does C2 mean on a Singer sewing machine?
The C2 error message will appear if the Buttonhole Lever is not full engaged. When pulling it down into position, make sure it is all the way down. When finished sewing buttonholes, make sure it is raised all the way up before doing regular sewing. Lynn – SINGER Sewing Company.
How do you unfreeze a Singer sewing machine?
Steps for Unfreezing a Sewing Machine
- Remove the bobbin. The bobbin is the cylindrical part of the machine that holds the thread. …
- Remove the cover from the machine. If the machine is still stuck after removing the bobbin, then you need to remove the cover and do further investigation. …
- Check the other parts.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
What width should my sewing machine be on?
A straight stitch has no width so it makes sense to set the dial at “0”. However, each machine varies so you will want to set the Stitch Width dial at the position where the needle is centered over the stitch plate. This will give you the most accurate seam allowance.
Why is my Singer sewing machine locked up?
Frozen machines are a result of lint, dust, dirt, and debris crystallizing and encrusting of the same inside the sewing machines. Broken parts and problems in bobbin and hook assembly are also leading causes of frozen sewing machines. … Trying to turn the wheel will tell you if your machine is jammed or locked up stuck.
What causes a sewing machine to lock up?
Neglect, Problems in the bobbin and hook assembly, and broken parts are the causes of locked up. Repairing bound up sewing machines, depends on the removal and elimination of crude in the machine. All the debris, lint, and crystallized lubricants must be removed.
Why is my sewing machine locked?
Sewing Machine: Machine locks up. Thread bunched up in the shuttle race often causes the sewing machine to lock up. … Clean lint and debris out of the shuttle race; they can prevent the needle from hooking the thread, resulting in thread bunching up in the shuttle race and jamming the needle.