Is the bobbin supposed to spin?

Insert the bobbin making sure the bobbin rotates counterclockwise when you pull the thread. NOTE: This is a very important step as the bobbin can become unthreaded and cause sewing problems if it rotates clockwise.

Should the bobbin case spin?

If you are sure it is the bobbin case here’s what you need to do. You need to make sure that the bobbin case is inserted properly. Start by turning the handwheel towards you until the needle is in it’s highest position. … When you insert the bobbin case it should always click in place.

Why is the bobbin not spinning?

The main source of birdnesting or looping is improperly inserted or threaded bobbin or running the embroidery machine with no bobbin. A tight bobbin tension, together with highly loose needle thread tension, can cause birdnesting.

Why is my bobbin winding underneath?

If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.

How do you fix bobbin tension?

To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.

IT IS INTERESTING:  What items are in a sewing kit?

What happens if you use the wrong bobbin?

The short answer is YES! Filling a sewing machine bobbin too tightly can make a plastic bobbin bulge or stretch the thread if you are using a metal bobbin. This may be hard to see but can cause all kinds of problems. Plastic bobbins can become compressed in the center causing the bobbin to distort.

How do I fix bobbin thread bunching?

How to Fix Bobbin Thread Bunching and Other Threading Problems

  1. Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle. …
  2. Change the Needle. …
  3. Inspect the Bobbin. …
  4. Clean the Machine.

12.12.2019

Handmade