# How much material do I need to make curtains?

Contents

Fabric calculations – Most curtains will require somewhere between 1 ½ and 2 ½ times fullness, depending on the heading and look you want to achieve. I always prefer to be generous and use 2 ½ times the width, skimpy curtains don’t look good and you can always use any extra fabric for cushions or tie backs.

## How do I calculate how much material I need for curtains?

How much fabric do I need to make curtains?

1. First, you will need to multiply the width of your rail by two.
2. Divide this by the cut width of your fabric i.e 137cm/ 54”.
3. Round up to the nearest full number, this is the amount of widths you need.

15.09.2020

## How many yards of fabric do you need to make curtains?

Yardage chart for a standard window PAIR of basic drapery panels @ 2.5x fullness

IT IS INTERESTING:  Can you embroider with a Cricut?
Finished Length Up To Solids & Small Prints Medium Prints (v-repeat up to 12″)
70″ Long 5 yards 5.5 yards
80″ Long 5.5 yards 6 yards
90″ Long 6 yards 6.5 yards
100″ Long 6.75 yards 7 yards

## How do you calculate curtains?

Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

## How do I calculate how much fabric I need?

Figure out how much fabric you need with this formula:

1. Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number).
2. Total number of pieces divided by number of pieces that fit into width equals number of rows you need.

13.02.2011

## What type of fabric is best for curtains?

Best fabrics for curtains

• 1 Voile. Voile is a woven fabric which is soft, lightweight and sheer. …
• 2 Lace. Lace fabric can be used as the sheer curtain ; the open weave of this fabric is suitable for the purpose. …
• 3 Nylon net. …
• 6 Gauze. …
• 7 Cotton. …
• 8 Synthetic fabrics. …
• 9 Linen. …
• 10 Silk.

## How much fabric do I need for wave curtains?

How much fabric is needed? With wave curtains, there’s little room for flexibility in terms of the amount of fabric you use, so it’s important to get it right. As a general rule, you’re likely to need between 2 and 2.5 times the area of your window, but be guided by the curtain track specifications.

IT IS INTERESTING:  Are knitting needles allowed on airplanes?

## How much fabric do I need for 96 inch curtains?

If it is the width and you have a 96-inch length then you will need a total of 7 yards of fabric. That is if you are just making regular curtains with no pleats.

## How much width of fabric do I need for pinch pleat curtains?

– A pinch pleat curtain requires more fabric to sew in the pleats as it gathers up tighter. As such you will require 2.5x the track width or 150% fullness.

## How much is a yard of fabric?

Measuring a Yard of Fabric

The material is unrolled from the bolt, and you should measure 36 inches or 3 feet. That’s precisely how much a yard of fabric is. The bolt is the part that holds the material together, and no matter how wide the fabric is, the yard is 36 inches measured off the selvage edge.

## What is a standard curtain width?

Ready-made curtains are available in three standard widths: 112 cm (44 inches), 167 cm (66 inches) or 228 cm (90 inches). You should choose the width that most closely matches the size of your track or pole.

## What is the rule of thumb for hanging curtains?

A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.

## Should curtains touch the floor?

The fabric should just touch the floor or hover half an inch above. This is also a great approach for café curtains (short panels that cover only the lower portion of a window and hit the sill), which work well in spots like the kitchen and bathroom, where long drapes aren’t practical.

IT IS INTERESTING:  Question: What part of the sewing machine holds the belt in place?

## What does 1 yard of fabric look like?

Most fabric today is sold by the linear yard. One linear yard is 36″ long and the width varies based on the roll of fabric. Our material is 54″ wide.

How big is one linear yard of fabric?

Yards Length Width
1 36 Inches (3 Feet) 54 Inches (4.5 Feet)
2 72 Inches (6 Feet) 54 Inches (4.5 Feet)

## How many 10 inch squares are in a yard of fabric?

How Many Squares in a Yard?!

Guideline for figuring number of pieces in a yard of fabric. (curved or unusual shaped pieces require more fabric)
Size of Square Pieces in 36″ Fabric Pieces in 45″ Fabric
9″ 16* 20
10″ 9 12
11″ 9 12

## How much is half a yard of fabric?

The fabric is sold by the yard, so if you got one yard of fabric it would 36 inches long by 44 inches wide. If you got a half yard it would be 18 inches long by 44 inches wide. If you wanted a quarter of a yard it would be 9 inches long by 44 inches wide.