How do you sew lining into curtains?

How much narrower should curtain lining be?

Your lining needs to be shorter and narrower than your main fabric. This is so that the main fabric will wrap around the back to create the return. The return is the border of fabric that you can see along each edge of the back of the curtain. Thermal lining should be cut 13cm (5⅛”) narrower than the main fabric.

How do you sew lined flat panel curtains?


  1. Cut the Materials and Sew the Bottom Fabric Hem. Install your curtain rod, and hang the rings you’re going to use. …
  2. Sew the Bottom Hem of the Lining. …
  3. Sew the Lining and Fabric Together. …
  4. Press the Drape. …
  5. Fold the Raw Fabric Edges. …
  6. Measure for the Top Hem. …
  7. Stitch the Top Hem.
  8. Finish the Drape.


Can you sew blackout lining to curtains?

Sew the blackout lining along the same stitch marks as the curtains. Use the same color thread as the store-bought curtains. If you don’t go along the same stitch marks as the curtains, that’s okay. … But blackout lining won’t fray so it’s great fabric to just cut and sew into place.

IT IS INTERESTING:  Question: Can I bring sewing scissors on a plane?

How do you add lining to curtains without sewing?

One of the easiest ways to join your blackout lining to your curtains is with the help of something called fusible hemming web. This can be used for joining two fabrics together. Simply place the hemming web tape between the two fabrics and then using a standard iron press together until they are bonded.

Does blackout lining need to be hemmed?

No you won’t need to hem them as blackout lining won’t fray, just lay them flat, pencil a line across the lining which should be at least 1” above curtain fabric and cut, done!

How do you hem curtains with blackout lining?

Once your fabric and liner are cut, the first thing to do is iron your top hem. Fold over your fabric one inch, iron. Fold over one inch again, iron. With your hem ironed, tuck the blackout liner under the hem leaving equal amounts of fabric on the sides and pin all across the top.

Which side of blackout lining faces the window?

The fabric side faces the window to help protect the coated side, although the blackout feature works regardless of the lining’s direction.

How do you sew two lined curtains together?

Place two curtain panels together, right-sides facing, and top and bottom hems matching. Pin along one long side. Using scissors or a rotary cutter and mat, cut off the hem on that side, cutting through both panels and the top and bottom hems. Remove the pins.

How do I calculate how much fabric I need for curtains?

How much fabric do I need to make curtains?

  1. First, you will need to multiply the width of your rail by two.
  2. Divide this by the cut width of your fabric i.e 137cm/ 54”.
  3. Round up to the nearest full number, this is the amount of widths you need.
IT IS INTERESTING:  Frequent question: How do you stitch in the ditch for quilting?


Is it cheaper to make your own curtains?

Y’all, custom curtains are not inexpensive. They are an investment! But they cost 1/3 less at Barn & Willow because they cut out the middleman and only operate online. But I’ll tell you, you get what you pay for!

How do you finish the edges of curtains?

Insert the needle under the top layer of the hem and along the second fold for 1/2 inch. Exit the fold and draw the thread up. Take another small stitch into the curtain and above the folded hem. Continue along the folded edge to the bottom of the hem.

How do you make curtains with interlining and lining?

How to interline curtains – attaching the interlining

  1. Curtain fabric with interlining. First, lay a fabric panel face up on the table. …
  2. Sewing interlining into position. Fold back the interlining and using an interlock stitch secure it every half width and on the seams. …
  3. Sew lining from leading edge and interlock.