If your bobbin tension is too loose, extra thread may unwind from the bobbin, which causes a buildup of thread underneath the needle plate. … If your top tension is too loose the bobbin thread is winning the tug-of-war and you will see excess thread build up under the needle plate.
Why does my bobbin thread keep doubling?
It is usually caused by a threading but as others have said, take the bobbin case out of your machine and clean that area. Rethread it making sure your bobbin is put back correctly and rethread your needle making sure as Kayl said your foot is in the up position. Match your needle to your fabric too.
Why does the thread bunch up underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
How do I fix bobbin thread bunching up?
How to Fix Bobbin Thread Bunching and Other Threading Problems
- Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle. …
- Change the Needle. …
- Inspect the Bobbin. …
- Clean the Machine.
How do you tell if your bobbin tension is off?
The thread should unwind just slightly and the bobbin case should drop an inch or two. If the thread unwinds without resistance and the case slips to the floor, your bobbin tension is too loose. If the bobbin case doesn’t budge, your bobbin tension is too tight.
Why won’t my sewing machine catch the bobbin thread?
If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension.
What tension should I use on my sewing machine?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
Why does my thread keep jamming?
The tension could be too tight or too loose. Set the tension to the basic thread tension setting or adjust the tension manually. The combination of the needle size, thread size and fabric is incorrect. Be sure to use the correct size needle and thread for the type of fabric that you are sewing.
What is wrong with the tension on my sewing machine?
Poor thread tension on a machine-sewn seam can result in an unstable seam, puckering, or just plain unattractive stitching. Perfect machine stitches interlock smoothly and look the same on both sides of the fabric. If you see small loops on the right or wrong side, the thread tension isn’t correct.