Can I interchange metal and plastic bobbins if they are the same size? Metal bobbins and plastic bobbins of the same size can NOT be swapped. Machines are set for a very precise tension setting. If they are set for a lighter plastic bobbin, the tension will change if a heavier metal bobbin is used.
Are plastic bobbins as good as metal?
The word on the street is that metal and plastic bobbins are not interchangeable. Even if they are the same class size, metal bobbins work in metal bobbin cases and plastic bobbins should be used in plastic bobbin cases. To learn which bobbin to use where just continue to read our article.
Can you use any bobbin in a sewing machine?
There is no such thing as a universal bobbin, meaning no single bobbin will fit every sewing machine. Some sewing machines tolerate a slightly different bobbin better than others, but using the incorrect bobbin will most likely affect the stitch quality of your project, and could result in damage to your machine.
Are all bobbins the same?
Bobbins not only come in different sizes, but also in metal as well as plastic, and empty as well as pre-wound. While machines can only use one bobbin size, whether it is plastic or metal does not typically matter, however consult your machine manual to be sure.
Do all Singer sewing machines use the same bobbins?
Bobbin Tips & Hints
Use only bobbins that are the same class/style as those that come with your machine – don’t substitute! SINGER® branded bobbins are recommended for best results.
What are the holes in bobbins for?
Then take a look at your bobbin. There should be a tiny little hole on the side for you to put your thread through. Thread from the inside of the bobbin, out, so your thread sticks out the side an inch or two.
What happens if I use the wrong bobbin?
The short answer is YES! Filling a sewing machine bobbin too tightly can make a plastic bobbin bulge or stretch the thread if you are using a metal bobbin. This may be hard to see but can cause all kinds of problems. Plastic bobbins can become compressed in the center causing the bobbin to distort.
Can I use metal bobbins in my Singer sewing machine?
Plastic bobbins and metal bobbins of the same size can NOT be swapped. Machines are set for a very precise tension setting. If they are set for a lighter plastic bobbin, the tension will change if a heavier metal bobbin is used. 6.
What type of bobbin does a Brother sewing machine use?
This machine uses SA156 bobbins which are class 15 type bobbins. Use of any other bobbin may result in injuries or damage to the machine. We recommend the use of Brother genuine parts and accessories.
What is the difference between Class 15 and 15J bobbins?
They look almost identical, but class 15 bobbins have flat ends, while class 15J bobbins have slightly curved ends. Sometimes they appear to work interchangeably, but even if they fit into your sewing machine, there is a risk of them jamming your machine up and causing major damage.
How many types of bobbins are there?
Did you know there are over 60 different bobbin styles available? Some are dramatically different, while others are so similar it’s difficult to see any difference at all.
What can I use instead of a bobbin?
There are machines that sew without a bobbin – they are called sergers, overlockers, chain stitch machines, and the thread for the underside of the fabric feeds off of a moving “looper” (a hinged hook with guides for the thread).
Can you use a sewing machine without a bobbin?
Can you use a sewing machine without a bobbin? You can’t sew without a bobbin, as the machine requires two spools in order to operate properly. Therefore, you will need to add the bobbin thread in addition to your needle thread.