Bobbins not only come in different sizes, but also in metal as well as plastic, and empty as well as pre-wound. While machines can only use one bobbin size, whether it is plastic or metal does not typically matter, however consult your machine manual to be sure.
Do all bobbins fit all sewing machines?
There is no such thing as a universal bobbin, meaning no single bobbin will fit every sewing machine. Some sewing machines tolerate a slightly different bobbin better than others, but using the incorrect bobbin will most likely affect the stitch quality of your project, and could result in damage to your machine.
What is the most common bobbin size?
There are many different bobbin sizes in use today. The most common sizes are the L Class, M Class and Class 15 bobbins. A large percentage of commercial and home sewing/embroidery machines use one or more of these bobbin sizes. Chances are your machine does too, but the difference between them is sometimes confusing.
What are the different bobbin sizes?
- Size 207 – 0.020″ (0.51 mm) – 70 Yards.
- Size 415 – 0.030″ (0.76 mm) – 70 Yards.
- Size 450 – 0.035″ (0.89 mm) – 70 Yards.
- Size 475 – 0.040″ (1.02 mm) – 70 Yards.
- Size 500 – 0.045″ (1.14 mm) – 70 Yards.
- Size 554 – 0.050″ (1.27 mm) – 70 Yards.
- Size 277 – 0.025″ (0.64 mm) – 24 Yards.
- Size 415 – 0.030″ (0.76 mm) – 12 Yards.
What happens if I use the wrong bobbin?
The short answer is YES! Filling a sewing machine bobbin too tightly can make a plastic bobbin bulge or stretch the thread if you are using a metal bobbin. This may be hard to see but can cause all kinds of problems. Plastic bobbins can become compressed in the center causing the bobbin to distort.
Are metal or plastic bobbins better?
The rule of thumb for bobbins is that metal ones are for metal bobbin cases and plastic ones are for plastic bobbin cases. If you try to place a metal bobbin in a plastic bobbin case you may see that the bobbin case wears out a lot faster than it is supposed to.
Are 15 and 15J Bobbins the same?
Definitely NOT interchangeable! They look almost identical, but class 15 bobbins have flat ends, while class 15J bobbins have slightly curved ends. Sometimes they appear to work interchangeably, but even if they fit into your sewing machine, there is a risk of them jamming your machine up and causing major damage.
Are all Singer Bobbins the same?
Bobbin Tips & Hints
Use only bobbins that are the same class/style as those that come with your machine – don’t substitute! SINGER® branded bobbins are recommended for best results. … The thread that is wound too tightly can distort or break the bobbin.
What class is a bobbins SA156?
Brother SA156 Class 15 Plastic 7/16″H Bobbins – 10 Pack
High quality clear plastic bobbins. 7/16 inch deep. Security notch for consistent bobbin thread winding.
What’s the difference between Class 15 and Class 66 bobbins?
There are two standard types of bobbins: Class 15 for Removable (oscillating) bobbin cases and Top Drop-In Bobbin Cases and Class 66 for Top Drop-in Bobbin Cases. Bobbins have a notch on the inside opening. This locks the bobbin onto the bobbin winder.
What size bobbin does a Brother sewing machine use?
11.5 Bobbin size – standard size bobbin. Compatible with most Brother Sewing machines and other brands (please check your machines manual for compatibility)
What are M size bobbins?
Style M / Size 92 bobbins are typically used with topstitch thread size 138. Size 92 – Style M bobbins are typically used on mid-sized and large commercial machines for sewing heavy fabric, canvas, upholstery, and leather. They are 0.435 inches (1.105 cm) high and 1.023 inches (2.598 cm) in diameter.
What size is SA156 bobbin?
SA156 Bobbins Joanns
It measures about 11.5 mm in size or 7/16 of an inch. It will be the size of a nickel and has a security notch for better winding.
Are there different size bobbins for Singer sewing machines?
There are several Singer bobbins which look very similar, but which have subtle differences that are important to the correct operation of the machine. It is important to ensure that you have the correct bobbin.