Best answer: How do you make double sided curtains?

Can you sew 2 pairs of curtains together?

With coordinating thread, sew down the length of your curtain panel. With the two curtain panels fully joined from top to bottom, you simply need to put the top and bottom back together as it was! To do that, lay your seam to one side and iron it in place.

What are reversible curtains?

These thermal curtains create an energy-saving barrier against heat and cold, keep the room much warmer in winter and block a lot heat during summer. … The reversible grommet style lets you easily hang your curtains from either side without hassle.

Can I cut curtains in half?

The curtain panel I used was lined, so I carefully lined up the back & front layers of fabric and pinned them in place before cutting it in half. I used a cutting board and roller cutter to make the cut, and to help me line it up and keep everything straight. After I cut it, I needed to hem the cut sides.

Does it matter if curtains are too wide?

A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

IT IS INTERESTING:  What can I do with scratchy wool yarn?

How do you make a patchwork curtain?

How to Sew a Patchwork Curtain

  1. I cut 63 squares. …
  2. Next I sewed the blocks into rows of seven. …
  3. After sewing nine rows of seven blocks each, I sewed all the rows together. …
  4. Lay the curtain out flat on top of fabric for the backing. …
  5. Pin the curtain and backing together, and cut the backing the same size as the curtain.

26.04.2016

What to do with curtains that are too long?

  1. Move the Rod. The easiest way to shorten curtains without hemming is to move the curtain rod. …
  2. Tie Them Back. Install a tieback and blouse the excess curtain over the tie creating a swagged effect. …
  3. Fuse or Glue. …
  4. Pinch & Pickup. …
  5. Fake a Valance.

How do you attach curtains to attached valances?

Making and Adding a Valance to a Pair of Curtains

Turn in a double 2.5cm (1″) hem down both side edges and along the bottom and pin. Mitre both bottom corners, stitch the hems in place and press. Pin the fringing along the bottom edge, close to the fold, turning in 2.5cm (1″) at each end to neaten. Backstitch in place.

How do you sew a ruffle?

  1. The first step is determining how wide you want your ruffle to be. …
  2. Cut out your ruffle pieces. …
  3. Sew your ruffle pieces together on both ends with a seam. …
  4. Sew a hem around the bottom of your ruffle pieces. …
  5. Change your tension to the highest one on your machine and also change your stitch length to a gathering stitch.
IT IS INTERESTING:  Do moths eat yarn?
Handmade